logo

products details

Created with Pixso. Home Created with Pixso. Products Created with Pixso.
Test Finger Probe
Created with Pixso.

125 mm Baffle Test Finger Probe with 12 mm Diameter and Two Articulated Joints for Safety Access Testing

125 mm Baffle Test Finger Probe with 12 mm Diameter and Two Articulated Joints for Safety Access Testing

Brand Name: HeJin
Model Number: HT-I02B
MOQ: 1 Set
Price: Negotiatable
Payment Terms: L/C,T/T
Supply Ability: 15 set per month
Detail Information
Place of Origin:
China
Certification:
Third party calibration certificate/ CE(cost additional)
Finger Diameter:
Ø12 Mm (+0 / -0.05 Mm)
Finger Length:
100 ± 0.2 Mm
Baffle Diameter:
Ø125 ± 0.2 Mm
Joint 1 Dimension:
30 ± 0.2 Mm
Joint 2 Dimension:
60 ± 0.2 Mm
Cylindrical Radius:
R2 ± 0.05 Mm
Spherical Radius:
S4 ± 0.05 Mm
Taper Angle:
14° (+0° / -10′)
Packaging Details:
Aluminum Box
Highlight:

125 mm Baffle Test Finger Probe

,

12 mm Diameter Jointed Test Probe

,

Two Articulated Joints Access Probe

Product Description

Large Baffle Test Finger Probe – 12 mm Diameter Jointed Finger with 125 mm Guard Plate for Safety Access Testing

The jointed test probe with a baffle is designed to determine whether openings in the enclosures of electrical equipment allow access to hazardous internal components. Featuring a 12 mm diameter jointed finger (100 mm in length) and a 125 mm diameter baffle, this probe provides a practical solution for verifying accessibility during product safety testing.

Equipped with two movable joints and manufactured to precise dimensional specifications, this test probe enables testing laboratories and manufacturers to evaluate the effectiveness of an enclosure in preventing access to hazardous parts, in accordance with relevant safety testing requirements.

Product Introduction

In the design of electrical product enclosures, the focus extends beyond mere aesthetics; it is essential to ensure that internal components are adequately protected. Furthermore, any openings in the product must be evaluated to determine whether a human finger could reach potentially hazardous areas.

The "test finger with a large baffle" is a specialized tool used for product safety assessments, designed to simulate a finger reaching toward internal structures. Its articulated design allows the probe to approach openings from various angles, while the 125 mm large baffle provides an extended external barrier.

Compared to standard test fingers equipped with smaller baffles, this configuration is specifically engineered for testing scenarios that mandate the use of an enlarged protective plate. It is particularly relevant when applicable product standards explicitly require this specific probe configuration.

Product Features

Large-Diameter Baffle Design

The 125 mm diameter baffle plate provides a larger contact and stopping surface than conventional smaller-baffle configurations. It is suitable for test procedures that specify a large baffle arrangement.

Two Articulated Joints

The probe incorporates two movable joints with specified joint dimensions of 30 mm and 60 mm. This structure allows the finger section to follow different access directions during testing.

Precision Finger Geometry

The 12 mm probe diameter, R2 cylindrical radius, S4 spherical radius and specified tip angles provide defined geometric references for manufacturing and dimensional inspection.

Controlled Dimensional Tolerances

Important dimensions are specified with manufacturing tolerances, including ±0.2 mm and ±0.05 mm values where indicated. This helps maintain dimensional consistency between production batches.

Direct Manufacturer Supply

HeJin is responsible for product development, design and manufacturing. Direct communication with the production source makes it easier to discuss technical drawings, product requirements, inspection details and customized configurations.

Product Functions:

The Large Baffle Test Finger Probe supports the following testing activities:

  • Accessibility verification: Evaluates whether the probe can reach specified internal areas through enclosure openings.
  • Finger-access simulation: Simulates the geometry of a human finger using a 12 mm diameter articulated probe.
  • Enclosure protection assessment: Supports testing of enclosure openings and protective structures according to the applicable product standard.
  • Baffle stopping verification: Uses the 125 mm diameter baffle to assess the specified insertion limitation.
  • Joint movement assessment: Allows articulated access testing from different approach directions.
  • Dimensional conformity inspection: Provides defined geometric dimensions for probe inspection and quality control.

The probe is a mechanical testing accessory. Any electrical contact indication or force-controlled test requires the appropriate additional equipment and a separately specified configuration.

Applicable International Standards

1.IEC 61032 – Protection of Persons and Equipment by Enclosures – Probes for Verification

Relevant reference: Figure 2 – Test Probe B

IEC 61032 specifies access probes used to verify protection provided by enclosures. Figure 2 defines the jointed Test Probe B configuration.

2.IEC 60529 – Degrees of Protection Provided by Enclosures (IP Code)

Relevant clauses:

  • Clause 5.1 – Protection against access to hazardous parts: Defines protection levels against access to hazardous parts.
  • Table 1 – Degrees of protection against access to hazardous parts: Describes the protection associated with the first characteristic numeral.
  • Clause 12.1 – Access probes: Identifies the probes used for verifying protection against access to hazardous parts.
  • Clause 12.2 – Test conditions: Specifies how the access probe is applied or inserted and the corresponding test force.
  • Clause 12.3 – Acceptance conditions: Defines the conditions for satisfactory protection.

3.IEC 60335-1 – Household and Similar Electrical Appliances – Safety – Part 1: General Requirements

Relevant clause:

  • Clause 8 – Protection against access to live parts
  • Clause 8.1 – Adequate protection against accidental contact with live parts
  • Clause 8.1.1 – Verification using specified test probes

4.IEC 60335-2-14 – Particular Requirements for Kitchen Machines

Technical Specifications


Parameter Specification
1 Product Name Large Baffle Test Finger Probe
2 Model HT-I02B
3 Joint 1 Dimension 30 ± 0.2 mm
4 Joint 2 Dimension 60 ± 0.2 mm
5 Finger Length 100 ± 0.2 mm
6 Fingertip-to-Baffle Dimension Not specified
7 Fingertip Cylindrical Radius R2 ± 0.05 mm
8 Fingertip Spherical Radius S4 ± 0.05 mm
9 Fingertip Cutting Bevel Angle 37° (+0° / -10′)
10 Fingertip Taper Angle 14° (+0° / -10′)
11 Test Finger Diameter Ø12 mm (+0 / -0.05 mm)
12 A-A Section Diameter Not specified
13 A-A Section Width Not specified
14 Baffle Diameter Ø125 ± 0.2 mm
15 Baffle Thickness Not specified

Core Technology and Manufacturing Quality

A reliable test probe begins with accurate geometry. Even small dimensional differences can affect how the probe interacts with an enclosure opening.

HeJin focuses on several important manufacturing aspects:

Precision dimensional machining

Key dimensions, including the finger diameter, joint lengths, tip radii and baffle diameter, are controlled according to the supplied technical specifications.

Joint structure and movement

The articulated structure is designed to provide the specified joint arrangement for accessibility testing.

Baffle dimensional control

The Ø125 mm baffle is an important distinguishing feature of this configuration. Its dimensional accuracy is checked against the product specification.

Product inspection

Manufacturing inspection focuses on the specified dimensional features and assembly condition before delivery.

Technical communication

Our engineering team can review customer drawings, standard references and testing requirements to help identify the appropriate probe configuration.

FAQs

Q1. What is a Large Baffle Test Finger Probe used for?

It is used for accessibility verification to evaluate whether specified internal components can be reached through openings in equipment enclosures, according to the applicable safety testing requirements.

Q2. What is the difference between a standard test finger and a large baffle test finger?

The main difference is the baffle configuration. HT-I02B features a 125 mm diameter baffle, while conventional configurations may use smaller baffle dimensions. The correct version depends on the applicable testing standard and required drawing.

Q3. What is the finger diameter of HT-I02B?

The test finger diameter is Ø12 mm, with a tolerance of +0 / -0.05 mm.

Q4. What is the finger length?

The specified finger length is 100 ± 0.2 mm.

Q5. What is the baffle diameter?

The baffle diameter is Ø125 ± 0.2 mm.

Q6. How many movable joints does the probe have?

It has two articulated joints. Their specified dimensions are 30 ± 0.2 mm and 60 ± 0.2 mm.

Q7. Does this test finger support IEC 61032 testing?

The product belongs to the jointed test finger family. However, HT-I02B has a specific large-baffle configuration. Customers should compare its drawing with the required IEC 61032 probe configuration before confirming conformity.

About HeJin – Test Equipment Design and Manufacturing

HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD is a China-based manufacturer of specialized testing equipment, established in 2015 and located in Guangzhou.

With more than 100 employees and over 50 technical engineers, HeJin combines engineering development, product design and manufacturing to support customers in different testing industries.

Our product portfolio includes:

  • Test Finger Probe and IP Test Equipment
  • IEC Test Equipment
  • Household Appliance Test Equipment
  • Mechanical Strength Test Equipment
  • Leak Testing Equipment
  • Environmental Test Chambers
  • Automatic Testing and Manufacturing Systems

We believe a good testing instrument should do more than meet a specification. It should help customers work with greater confidence, improve inspection consistency and make their quality-control process more dependable.

From technical consultation to manufacturing and after-sales assistance, HeJin works directly with customers to provide practical testing solutions.